Preface

Thank you for choosing our company's product!

This manual provides a detailed guide for the installation and debugging of the LaserEdge series professional laser cutting system from Chaokong (hereinafter referred to as LaserEdge). It covers hardware descriptions, wiring instructions, software installation, and software debugging. Please note that the LaserEdge software must be used with a corresponding control card. If you do not yet have a control card, you can use the simulation mode.

Please read this manual carefully before operation. This will help you make better use of this software and related equipment. Due to continuous product optimization and upgrades, some features of the product you receive may differ from the information described in this manual. We apologize for any discrepancies in advance.

We reserve all rights to this document, including issued patents and other registered commercial ownership rights mentioned herein. Unauthorized use of this document is strictly prohibited, especially copying and distribution to third parties.

If you find any errors in this document, please feel free to contact our technical staff for feedback.

Recent Revision History:

No.	Date	Revision Description
1	2025.05.30	V 2.0
2	2025.07.15	Added installation and wiring instructions for Mate60E, GE61, GE62